1.Use Steel-Rule-knife for performing forming and cutting in the same station
2.Trim-in-place for processing PP, PET, PS, PVC, BOPS material etc. specially perfect for PP .
3.Automatic stacking, counting unit and conveying system
4.Trim-in-place for parts with rolled edge (turn-down lip)
5.Technology of trim-in-place brings a neat and identical trimming(cutting)
6.Plug assistant for deep forming of draw
7.Floating knife and free knife are available for post-trimming film with high shrinkage rate.
8.Extra Contact Heat plate for Minimizing power consumption is available.
|1||Max. Mould Area||800*600mm|
|2||Max. Depth of Draw under sheet||120mm (others at request)|
|3||Max. Depth of Draw above sheet||30mm (others at request)|
|4||Max. Clamping Force||750KN|
|5||Suitable Material||PP, PET, PS, PVC, BOPS|
|6||Sheet Width||460- 850mm|
|7||Material Thickness Range||0.2-1.5mm|
|8||Max. Material Roll Diameter||1000mm|
|9||Max. Dry Run Speed||45 Cycles/min|
|10||Power Supply||3-N AC380V±15V,(others at request)|
|13||Air Consumption||2500 Liters/min|
|14||Cooling Water Consumption||13 Liters/min 15° - 20°C|
1.Warranty:1 year warranty after installation, if the spare parts is broken in the warranty period, we will send a free replacement parts as free.
2.Installation and training: we can send 1-2 engineers to install and set up the machine, but all the charges should be paid by buyer.
3.Quotation: valid for 60 days.