Quantity: | |
---|---|
Feature:
1.Use Steel-Rule-knife for performing forming and cutting in the same station
2.Trim-in-place for processing PP, PET, PS, PVC, BOPS material etc. specially perfect for PP .
3.Automatic stacking, counting unit and conveying system
4.Trim-in-place for parts with rolled edge (turn-down lip)
5.Technology of trim-in-place brings a neat and identical trimming(cutting)
6.Plug assistant for deep forming of draw
7.Floating knife and free knife are available for post-trimming film with high shrinkage rate.
8.Extra Contact Heat plate for Minimizing power consumption is available.
Technical Parameter:
1 | Max. Mould Area | 800*600mm |
2 | Max. Depth of Draw under sheet | 120mm (others at request) |
3 | Max. Depth of Draw above sheet | 30mm (others at request) |
4 | Max. Clamping Force | 750KN |
5 | Suitable Material | PP, PET, PS, PVC, BOPS |
6 | Sheet Width | 460- 850mm |
7 | Material Thickness Range | 0.2-1.5mm |
8 | Max. Material Roll Diameter | 1000mm |
9 | Max. Dry Run Speed | 45 Cycles/min |
10 | Power Supply | 3-N AC380V±15V,(others at request) |
11 | Power Consumption | Approx.35kilowatts/hr |
12 | Air Pressure | 0.7Mpa |
13 | Air Consumption | 2500 Liters/min |
14 | Cooling Water Consumption | 13 Liters/min 15° - 20°C |
15 | Dimensions | 9.5m*2.2m*2.2(L*W*H) |
Sample Picture:
Our Services:
1.Warranty:1 year warranty after installation, if the spare parts is broken in the warranty period, we will send a free replacement parts as free.
2.Installation and training: we can send 1-2 engineers to install and set up the machine, but all the charges should be paid by buyer.
3.Quotation: valid for 60 days.
Packaging Shipping:
Contact Information:
Ms Lena Cai
Mob:+86-13506569687
lena@polyprint.cn